Liam Roberts Liam Roberts's Profile Page

Liam Roberts Liam Roberts

0 Course Enrolled • 0 Course Completed

Biography

CWNP CWSP-208 Prüfungs-Guide, CWSP-208 Lernhilfe

Die CWNP CWSP-208 (Certified Wireless Security Professional (CWSP))Schulungsunterlagen von Zertpruefung sind den echten Prüfungen ähnlich. Durch die kurze Sonderausbildung können Sie schnell die Fachkenntnisse beherrschen und sich gut auf die CWNP CWSP-208 (Certified Wireless Security Professional (CWSP))Prüfung vorbereiten. Wir versprechen, dass wir alles tun würden, um Ihnen beim Bestehen der CWNP CWSP-208 Zertifizierungsprüfung helfen.

CWNP CWSP-208 Prüfungsplan:

Thema
Einzelheiten

Thema 1

Security Lifecycle Management: This section of the exam assesses the performance of a Network Infrastructure Engineer in overseeing the full security lifecycle—from identifying new technologies to ongoing monitoring and auditing. It examines the ability to assess risks associated with new WLAN implementations, apply suitable protections, and perform compliance checks using tools like SIEM. Candidates must also demonstrate effective change management, maintenance strategies, and the use of audit tools to detect vulnerabilities and generate insightful security reports. The evaluation includes tasks such as conducting user interviews, reviewing access controls, performing scans, and reporting findings in alignment with organizational objectives.

Thema 2

Security Policy: This section of the exam measures the skills of a Wireless Security Analyst and covers how WLAN security requirements are defined and aligned with organizational needs. It emphasizes evaluating regulatory and technical policies, involving stakeholders, and reviewing infrastructure and client devices. It also assesses how well high-level security policies are written, approved, and maintained throughout their lifecycle, including training initiatives to ensure ongoing stakeholder awareness and compliance.

Thema 3

Vulnerabilities, Threats, and Attacks: This section of the exam evaluates a Network Infrastructure Engineer in identifying and mitigating vulnerabilities and threats within WLAN systems. Candidates are expected to use reliable information sources like CVE databases to assess risks, apply remediations, and implement quarantine protocols. The domain also focuses on detecting and responding to attacks such as eavesdropping and phishing. It includes penetration testing, log analysis, and using monitoring tools like SIEM systems or WIPS
WIDS. Additionally, it covers risk analysis procedures, including asset management, risk ratings, and loss calculations to support the development of informed risk management plans.

Thema 4

WLAN Security Design and Architecture: This part of the exam focuses on the abilities of a Wireless Security Analyst in selecting and deploying appropriate WLAN security solutions in line with established policies. It includes implementing authentication mechanisms like WPA2, WPA3, 802.1X
EAP, and guest access strategies, as well as choosing the right encryption methods, such as AES or VPNs. The section further assesses knowledge of wireless monitoring systems, understanding of AKM processes, and the ability to set up wired security systems like VLANs, firewalls, and ACLs to support wireless infrastructures. Candidates are also tested on their ability to manage secure client onboarding, configure NAC, and implement roaming technologies such as 802.11r. The domain finishes by evaluating practices for protecting public networks, avoiding common configuration errors, and mitigating risks tied to weak security protocols.

>> CWNP CWSP-208 Prüfungs-Guide <<

CWSP-208 Test Dumps, CWSP-208 VCE Engine Ausbildung, CWSP-208 aktuelle Prüfung

Die Zertifizierung der CWNP CWSP-208 zu erwerben bedeutet mehr Möglichkeiten in der IT-Branche. Wir Zertpruefung haben schon reichliche Erfahrungen von der Entwicklung der CWNP CWSP-208 Prüfungssoftware. Unsere Technik-Gruppe verbessert beständig die Prüfungsunterlagen, um die Benutzer der CWNP CWSP-208 Prüfungssoftware immer leichter die Prüfung bestehen zu lassen.

CWNP Certified Wireless Security Professional (CWSP) CWSP-208 Prüfungsfragen mit Lösungen (Q84-Q89):

84. Frage
What drawbacks initially prevented the widespread acceptance and use of Opportunistic Key Caching (OKC)?

A. Key exchanges during fast roams required processor-intensive cryptography, which was prohibitive for legacy devices supporting only TKIP.
B. Sharing cached keys between controllers during inter-controller roaming created vulnerabilities that exposed the keys to attackers.
C. The Wi-Fi Alliance continually delayed the creation of a client certification for OKC, even though it was defined by IEEE 802.11r.
D. Because OKC is not defined by any standards or certification body, client support was delayed and sporadic early on.

Antwort: D

Begründung:
Opportunistic Key Caching (OKC) is a non-standardized fast roaming method that allows clients to roam between APs without repeating the full 802.1X/EAP authentication process.
OKC was proposed by vendors (not the IEEE or Wi-Fi Alliance), so there was no formal certification early on.
This led to inconsistent and delayed client support, preventing widespread adoption.
Incorrect:
A). OKC does not involve inter-controller roaming in most scenarios; it's a local caching method.
C). The cryptographic overhead was not a significant barrier compared to lack of standardization.
D). OKC was not defined in IEEE 802.11r-Fast BSS Transition (FT) was.
References:
CWSP-208 Study Guide, Chapter 6 (Fast Secure Roaming)
CWNP Wireless Mobility Standards Overview

85. Frage
What software and hardware tools are used together to hijack a wireless station from the authorized wireless network onto an unauthorized wireless network? (Choose 2)

A. A low-gain patch antenna and terminal emulation software
B. MAC spoofing software and MAC DoS software
C. RF jamming device and a wireless radio card
D. DHCP server software and access point software
E. A wireless workgroup bridge and a protocol analyzer

Antwort: C,D

Begründung:
To hijack a wireless client, attackers often use:
An RF jamming device to disconnect the client from the legitimate AP (via deauth attacks or RF disruption) A rogue AP (created using access point software) that impersonates the real network DHCP server software to assign IP addresses and act as a gateway, completing the fake network Incorrect:
B). Terminal emulation is not relevant.
C). Workgroup bridges and protocol analyzers are for monitoring, not attacking.
E). MAC spoofing and DoS do not complete a hijack.
References:
CWSP-208 Study Guide, Chapter 5 (Hijacking Tools and Techniques)
CWNP Practical WLAN Attack Tools Guide

86. Frage
ABC Company requires the ability to identify and quickly locate rogue devices. ABC has chosen an overlay WIPS solution with sensors that use dipole antennas to perform this task. Use your knowledge of location tracking techniques to answer the question.
In what ways can this 802.11-based WIPS platform determine the location of rogue laptops or APs? (Choose
3)

A. GPS Positioning
B. Angle of Arrival (AoA)
C. RF Fingerprinting
D. Time Difference of Arrival (TDoA)
E. Trilateration of RSSI measurements

Antwort: C,D,E

Begründung:
WIPS platforms with multiple sensors can locate rogue devices using:
A). TDoA: Measures the time difference a signal takes to reach multiple sensors; requires synchronized clocks.
C). Trilateration using RSSI: Estimates distance based on signal strength from three or more known sensor positions.
E). RF Fingerprinting: Matches received signals to known RF patterns in the environment for device positioning.
AoA requires directional antennas (not typical with dipoles), and GPS is used for locating mobile sensors or vehicles, not indoor rogues.
References:
CWSP-208 Study Guide, Chapter 7 - Location Tracking Techniques
CWNP CWSP-208 Objectives: "Rogue Device Location via RSSI, TDoA, and Fingerprinting"

87. Frage
Which one of the following describes the correct hierarchy of 802.1X authentication key derivation?

A. After successful EAP authentication, the RADIUS server generates a PMK. A separate key, the MSK, is derived from the AAA key and is hashed with the PMK to create the PTK and GTK.
B. If passphrase-based client authentication is used by the EAP type, the PMK is mapped directly from the user's passphrase. The PMK is then used during the 4-way handshake to create data encryption keys.
C. The PMK is generated from a successful mutual EAP authentication. When mutual authentication is not used, an MSK is created. Either of these two keys may be used to derive the temporal data encryption keys during the 4-way handshake.
D. The MSK is generated from the 802.1X/EAP authentication. The PMK is derived from the MSK. The PTK is derived from the PMK, and the keys used for actual data encryption are a part of the PTK.

Antwort: D

Begründung:
In 802.1X/EAP authentication:
The EAP method (e.g., EAP-TLS, PEAP) results in the generation of a Master Session Key (MSK).
The Pairwise Master Key (PMK) is derived from the MSK.
The Pairwise Transient Key (PTK) is derived from the PMK using nonces and MAC addresses during the 4- Way Handshake.
The PTK includes the actual keys used for data encryption.
Incorrect:
B). This applies to WPA/WPA2-Personal, not 802.1X/EAP.
C). The RADIUS server sends the MSK, not the PMK directly.
D). The MSK is always derived during EAP authentication, mutual or not.
References:
CWSP-208 Study Guide, Chapter 3 (Key Hierarchy)
IEEE 802.11i Specification

88. Frage
When used as part of a WLAN authentication solution, what is the role of LDAP?

A. An Authentication Server (AS) that communicates directly with, and provides authentication for, the Supplicant.
B. An IEEE X.500 standard compliant database that participates in the 802.1X port-based access control process
C. A role-based access control protocol for filtering data to/from authenticated stations.
D. A SQL compliant authentication service capable of dynamic key generation and distribution
E. A data retrieval protocol used by an authentication service such as RADIUS

Antwort: E

Begründung:
LDAP (Lightweight Directory Access Protocol) is used to query and retrieve user credential information from a directory service (like Microsoft Active Directory).
It's not an authentication protocol itself but is used by services like RADIUS to validate user credentials during the EAP authentication process.
Incorrect:
B). LDAP is not directly compliant with X.500-it uses a simplified subset.
C). LDAP is not a SQL-compliant protocol.
D). LDAP is not a role-based access control mechanism.
E). LDAP is not an Authentication Server by itself.
References:
CWSP-208 Study Guide, Chapter 4 (LDAP Integration with RADIUS)
CWNP AAA Architecture Overview

89. Frage
......

Die Qualifikation ist nicht gleich wie die Fähigkeit eines Menschen. Die Qualifikation bedeutet nur, dass Sie dieses Lernerlebnis hat. Und die reale Fähigkeit sind in der Ppraxis entstanden. Sie hat keine direkte Verbindung mit der Qualifikation. Sie sollen niemals das Gefühl haben, dass Sie nicht exzellent ist. Sie sollen auch nie an Ihrer Fähigkeit zweifeln. Wenn Sie die Dumps zurCWNP CWSP-208 Zertifizierungsprüfung wählen, sollen Sie sich bemühen, die Prüfung zu bestehen. Wenn Sie sich fürchten, CWSP-208 Prüfung nicht bestehen zu können, wählen Sie doch die Sulungsunterlagen zur CWNP CWSP-208 Prüfung von Zertpruefung. Egal ob welche Qualifikation haben, können Sie ganz einfach die Inhalte der Fragenkataloge verstehen und die CWSP-208 Prüfung erfolgreich abschließen.

CWSP-208 Lernhilfe: https://www.zertpruefung.de/CWSP-208_exam.html

Liam Roberts Liam Roberts

Biography

Location 1:

Pages